XRumer is easy to buy and hard to set up well. Most people who give up on it never get past the first week: the wrong licence, a server that is too small, XEvil without proxies, too many threads, or a base that is too big. This guide walks you through the setup in the order that works, from the licence to your first indexed links, with the settings experienced XRumer users run in 2026.
We have worked with automated link building software since December 2012, and we run XRumer on our own licence. Asia Virtual Solutions is an affiliate for XRumer: registering through our link costs you less than list price, never more.
In short: how to set up XRumer in 2026
- Register a free Botmaster account through our link, then buy Standart (it includes XEvil).
- Eklemek version 23 StrongAI access ve XEvil 7 beta access. Both are separate items.
- Run XRumer and XEvil together on one Windows VPS with at least 16 GB of RAM, such as our XEvil VPS. Remove Microsoft Defender Antivirus before you download anything.
- Give XEvil rotating IPv6 proxies for reCaptcha, with a new proxy on every request.
- Start at about 100 XRumer threads and 100 XEvil threads. Version 23 can go much higher, but runs above about 200 tend to hang.
- Keep each link base under 2.5 million lines, and clean it into a base of links that actually worked.
- Send the successful links for indexing, then check what Google indexed.
🧾 Step 1: Choose the right XRumer licence
XRumer comes in three tiers. The difference that matters most is XEvil, the captcha solver.
| Lite | Standart | İşletme | |
|---|---|---|---|
| XEvil captcha çözücüsü | HAYIR | Evet | Evet |
| Hrefer ayrıştırıcısı | Evet | Evet | Evet |
| Eş zamanlı kurulumlar | 1 | 2 | 5 |
| Copies you can control through MCP | — | 2 | 5 |
Pick Standard unless you know you need more. Lite has no XEvil, so you would pay an outside captcha service for every solve. Pick Business if you plan to run several servers at once. Serious XRumer users often do, because a few servers side by side show quickly which one is underperforming.
Four costs are easy to miss:
- Version 23 StrongAI access is a separate purchase. Without it you get the older version 19 branch, which is slower and hangs more. Add it in the Downloads section of your Botmaster account.
- XEvil 7 beta access is also a separate payment. XEvil 7 has carried the “beta” label for more than half a year, but it is the version most XRumer users run today. XEvil 6 gets little or no development any more, so we do not recommend it. Expect XEvil 7 to stay a paid add-on until a newer version arrives.
- Updates are free for three months, then $10 per month or $100 per year. The licence itself is lifetime. Keep the update subscription active: when it lapses, users report a flood of errors.
- Botmaster’s public price list always shows full price. The discount from our link is applied to your account when you register, so you see it after you log in.
Prices and the discount: see our XRumer page. To buy, register through our link.
🖥️ Step 2: Run XRumer and XEvil together on one VPS
XRumer and XEvil work best as one system on one machine. XRumer sends every captcha straight to XEvil on the same server, with no network delay and no firewall rules to manage. Botmaster’s published minimum for XRumer is:
- 64-bit Windows 7, 8, 8.1, 10 or 11
- Windows Server 2012 R2 works. Server 2016 and 2019 are “not recommended” by Botmaster, although many users run 2019 without trouble. Botmaster’s list does not mention Server 2022, but we run XRumer and XEvil on Windows Server 2022 VPS and dedicated servers with no problems.
- 2 GHz or faster processor
- 16 GB of RAM minimum
- Hızlı, sınırsız internet
Açık Windows 11 24H2 or 25H2 you need a compatibility patch. Botmaster support sends it on request through Telegram.
Use a VPS, not your home PC. A home PC can carry the load, but regular runs strain your connection and can get your home IP blocked. A VPS runs day and night, and when a server’s IP wears out you can replace the server.
Our recommendation: the XEvil VPS. It is built for exactly this pair:
| XEvil VPS | |
|---|---|
| İşlemci | 10 vCPU on AMD EPYC 7763 |
| Memory and disk | 16 GB ECC RAM, 150 GB NVMe |
| Windows | Fully licensed Windows Server 2022, full Administrator access by Remote Desktop |
| Ağ | Dedicated IPv4 address, Singapore |
| Proxies included | 1,000 rotating IPv6 proxy ports for reCaptcha, 100 concurrent connections |
| Set up for you | XEvil installed with the XRumer / GSA SER preset, XAuth installed, proxies connected |
You install XRumer on the same server next to XEvil. The licence is not included: you bring your own XRumer licence, and XEvil comes with Standard and Business. Discounted licences are sold separately.
Tested on our own servers: we run XRumer and XEvil together on this VPS at 100 XRumer threads and 100 XEvil threads, and it stays stable.
Prepare Windows before you install
Do these three things before you download anything from Botmaster:
- Remove Microsoft Defender Antivirus first. Defender and other antivirus programs often block or delete XRumer and XEvil files while you download, install and run them. Adding exclusions does not always work, so remove it completely: open Server Manager → Manage → Remove Roles and Features, click through to Özellikler, untick Microsoft Defender Antivirüs (called “Windows Defender Features” on older Windows Server versions), finish the wizard and restart the server. If another antivirus program is installed, uninstall that too.
- Install all Windows updates, then switch automatic updates off. A forced restart in the middle of a run stops XRumer and XEvil.
- Move the Windows taskbar to the side of the screen. XRumer’s window is tall, and on a small Remote Desktop screen the taskbar hides its bottom controls.
Server Manager → Manage → Remove Roles and Features → Features. On this server Defender is already removed, so it shows as “Not installed”. On a new server the box is ticked: untick it, click Next, then Remove, and restart.
⚠️ Keep this server for XRumer only. With Defender removed, the server has no virus protection. Do not save passwords, client files or other sensitive information on it, and do not use it for everyday browsing or e-mail. Use it to run XRumer, XEvil and their tools, and nothing else.
🔑 Step 3: Install XRumer and add version 23
- Log in to your Botmaster account and open Downloads. For a new install you need two files from Main programs: XRumer 23 StrongAI – full distributive (only shown if you bought version 23 access) and XEvil 7.0 [Beta] full distributive (installer) (this needs the paid XEvil 7 beta access). Skip the update patches and the XEvil 6 files. XEvil is a much larger download. If the server’s browser is slow, download on your own PC and copy the files over. Your browser may warn that the file “could harm your device”. Browsers often flag XRumer and XEvil files. Click Keep to finish the download, but only for files from your own Botmaster account.
- Install XRumer and XEvil in the root of the C: drive, never in Program Files. XRumer comes as a self-extracting archive: double-click the downloaded file, set the destination folder to
C:\XRumerve tıklayın Extract. XEvil 7 comes as an installer: when it asks for a folder, change it toC:\XEvil. Windows protects the Program Files folder, and XRumer and XEvil need to write their own settings, logs and link bases inside their folders. In Program Files that often fails or causes errors. - Make a desktop shortcut for XRumer. XRumer does not create a desktop icon by itself. Open
C:\XRumer, right-click start.exe ve seçin Send to → Desktop (create shortcut). - Check the blacklist first. XRumer’s blacklist is two text files in
C:\XRumer: xblack.txt ve xblack_inurl.txt. They list sites XRumer must never post to, such as sites that send abuse complaints to your host. Both come with the XRumer download, already filled with domains to skip. Keep those, and add any site that complains about your posts to xblack.txt. A new XRumer version can replace the file, so keep a copy of your own additions. - Start XRumer and log in. Double-click start.exe içinde
C:\XRumer, or the desktop shortcut you just made. The first time, XRumer opens a login screen: enter the login and password you use on the Botmaster website (both are case sensitive), choose your language and click Ok. XRumer then says it must be restarted to complete authorization. Click TAMAM, then start XRumer again from start.exe or the desktop shortcut.
The Downloads area of our own Botmaster account (Business licence with XEvil 7 beta access). For a new install, download the two full distributives marked in orange. Version numbers change with each release, so pick the newest.
If your browser says the XRumer file could harm your device, click Keep. Do this only for files from your own Botmaster account.
Double-click the XRumer download, set the destination folder to C:\XRumer and click Extract.
XRumer does not add a desktop icon. In the folder you extracted it to, right-click start.exe and choose Send to → Desktop (create shortcut).
The blacklist in the XRumer folder: xblack.txt and xblack_inurl.txt. The name has no “blacklist” in it, so look for xblack.
The first time you start XRumer, log in with your Botmaster website details and pick your language.
After the first login, click OK and start XRumer again to finish the authorization.
Learn two folders on day one: Projeler holds your projects and Bağlantılar holds your link bases. After you add a project or a base, close and reopen XRumer. It does not see new files while it runs. This catches almost every beginner.
The XRumer folder after the install. Projects holds your projects, Links holds your link bases, and Logs holds the results of every run (Step 7).
After the restart you see XRumer’s main window. Look at the status bar at the bottom. On a new server it says XEvil is Olumsuz connected. That is normal: you connect XEvil in Step 4. The threads number may show 50; you set it to 100 in Step 5. Anonimlik also shows OFF on a new install. Leave it for now, but never start a run like that: Step 5 shows how to turn on posting proxies.
XRumer’s main window after the first start. Marked: the threads number (set it to 100 in Step 5) and the status bar, which shows whether XEvil is connected. Our server already runs XEvil, so ours says connected.
Check the Event journal. It shows what XRumer loaded at start-up. Look for two lines: Authorization complete ve Test of AI textual captcha module bypass successfully. If both are there, the install works. The line MCP: connected to control server only appears after you turn on the MCP connector in Step 8.
The Event journal after a clean start. The first line shows the link base XRumer loaded and its number of lines. This test loaded our full raw list; for real runs, keep each base under 2.5 million lines (Step 7).
🧩 Step 4: Connect XEvil and give it proxies
XEvil is included with Standard and Business. It recognises more than 8,400 image captcha types locally, plus reCaptcha v2 and v3, so there is no fee per solve.
Run XEvil 7, not XEvil 6. XEvil 7 still shows as a beta, but it has been out for more than half a year and is the version most people use. XEvil 6 gets little or no development, so we do not recommend it for new setups. XEvil 7 beta access is an extra payment on top of your XRumer licence (see Step 1).
Connect it to XRumer:
- In XEvil, use the hosts-file corrector and set the Antigate emulation to the latest version. XEvil then answers the captcha requests XRumer sends.
- Choose the XRumer 23.0.5+ preset. In XEvil’s Options window, click Customize neuronets…, pick XRumer 23.0.5+ içinde Preset list, click Ayarlamak, Daha sonra Apply & Save. It switches on the x23 neural networks trained on forum captchas: phpBB, IPB, vBulletin, SMF, Discuz and Bitrix.
- In XRumer’s captcha options, set reCaptcha (and hCaptcha, if you use it) to be processed through XEvil.
- When XRumer starts, check that XEvil shows its connection as OK.
XEvil 7 → Service emulation → Settings. Marked: the Service emulation button, the emulation choice and the + Hosts button. Our test server is set up for GSA SER, so it shows RuCaptcha. For XRumer, pick the latest Antigate emulation as item 1 says. We blurred the server IP.
XEvil 7 → Options → Customize neuronets. Marked: the XRumer 23.0.5+ preset and the Set button, the six x23 forum cores it switches on, the enabled cores list, and Apply & Save.
When XEvil runs with XRumer 23, XRumer handles the licence. The separate XAuth app is only needed for XEvil on its own. Our XEvil standalone guide covers that case.
Give XEvil proxies. Without proxies, every captcha request leaves from your server’s IP. Sites challenge you harder and retries pile up.
| reCaptcha (RC) | hCaptcha (HC), optional | |
|---|---|---|
| Proxy type | Rotating IPv6, the most economical (IPv4 also works) | Private IPv4 |
| Proxy setting | List of SOCKS5 proxies, new proxy on every request | Same, as a separate list |
| Max threads | About 100 | About 100 |
| Timeout | About 500 seconds | About 500 seconds |
| Our option | Included with the XEvil VPS (1,000 rotating IPv6 ports). For other servers: XEvil proxy'leri | About 10 dedicated IPv4 proxies per server |
XEvil 7’s reCaptcha module. Marked: Enable module and the [RC] settings panel (threads, proxy type, proxy list, rotation and timeout). This server is set up for GSA SER, so its numbers differ. For XRumer, use the values in the table above. We blurred the proxies and target URLs.
A busy XRumer server peaks at roughly 35 to 50 simultaneous reCaptcha proxy connections, so the XEvil VPS’s 100 concurrent connections leave headroom. reCaptcha v3 scores depend on proxy quality, and Botmaster recommends residential proxies for it. hCaptcha support is limited: Botmaster stopped it in December 2024, and a module for 3×3 image tasks returned in the XEvil 7 betas as a paid subscription. Test it on your own targets before you pay for hCaptcha proxies.
Low solve rates are almost always proxies, threads or the captcha type, not XEvil itself. Our guide Why are my captcha solve rates so low? walks through the checks.
⚙️ Step 5: The XRumer settings that matter
Most settings can stay at their defaults. These are the ones worth changing:
| Ayar | Kullanmak | Neden |
|---|---|---|
| Konular | 100 (XEvil at 100) | Stable on version 23 and easy on the server. 100 XEvil threads also match our 100-thread XEvil proxy package. Version 23 can run 500 or more, but runs above about 200 tend to hang. |
| Speed vs success slider (Options → Speed <—–> Success rate) | Fully to the success side | You want links, not speed. Move the slider first: it resets the numbers below it. |
| Maximum size of loading page (same window) | 15000 KB | The slider sets 1,100. A lower limit skips heavier pages and costs you placements. |
| Maximum URL’s count per page (same window) | 650, the maximum | XRumer warns above 650: a page with more links is over-spammed and a link there brings little value. |
| Captcha options (same window) | reCaptcha and hCaptcha through XEvil; captcha recognition and text captchas on Automatic; tick “Save correct answers in textcaptcha.txt” | Saved answers build your own text captcha library. |
| Basic mode (Options → Advanced options) | Default | Registers and confirms only where posting needs it. |
| Promotion mode (same window) | Posting, with Aggressive posting mode ticked and Topic creation / reply to existing one | The highest success rate. |
| Modification | Default | The NoContact mode has caused hangs, and Botmaster support recommends Default. |
| Tools → duplicate removal | By full link, not by hostname | Keeps several good pages on the same domain. |
| Posting proxies (Anonymity, on the main window) | Required. Rotating SOCKS proxies, or our IPv4 proxies | Posting from your server’s own IP brings abuse complaints to your host. |
| E-mail activation, proxy checker | Defaults | Fine for most setups. |
Remember to press Kaydetmek on every settings tab you change.
Never post without proxies. If XRumer posts from your server’s own IP, site owners send abuse complaints to your host, and the server can be shut down. On the main window, set Anonimlik to HTTP or SOCKS. Use rotating SOCKS proxies, or our IPv4 proxies, which also work with XRumer. Put them in xsocks.txt (SOCKS) or xproxy.txt (HTTP) in C:\XRumer. These posting proxies are separate from the XEvil proxies in Step 4.
Basic mode and promotion mode are in Options → Advanced options:
Options → Advanced options. Marked: Default basic mode, Posting promotion mode, Aggressive posting mode ticked and “Topic creation / reply to existing one”. Ticking Aggressive mode can switch the radio button below it, so check it again before you save.
The slider, page size and captcha options are in Options → Speed <—–> Success rate. When you save, XRumer may warn that links per page are limited to 650. That is normal: click OK.
Options → Speed <—–> Success rate. Marked: the slider at “Higher success rate”, 15000 KB page size, 650 URLs per page, reCaptcha and hCaptcha through XEvil, and automatic text captchas that save correct answers.
🎯 Step 6: Set up e-mail and your first project
E-mail. XRumer needs a mailbox to confirm registrations.
- Best: your own domain with one mailbox that catches mail for every address (a catch-all). XRumer invents a new address for each site, and every message lands in one box. You only change the domain about once a month.
- Disposable mail works too, but you may need to replace it almost daily.
- Enter the mailbox in the project’s E-Mail section: address, login, password and POP server. Then press Check this email. Before the first run, both POP3 and IMAP should show OK.
Your first project:
- Up to 50 target URLs per project. More than that and XRumer tends to hang.
- About 100 keywords for that page. Take them from Google Search Console: the queries the page already ranks for in the top 10–30. Do not use keywords for the whole site, because that dilutes the page’s relevance.
- Çapa noktalarınızı karıştırın. Exact keywords, URLs and brand, shuffled.
- Save the project in the
Projelerfolder and restart XRumer. - Press Test several times before the real run. Check that the text, nicknames and links come out clean, with no broken characters.
- Check that Anonimlik is on HTTP or SOCKS, pick a base, set 100 threads and press Start. Restarting XEvil before each new project avoids stale sessions.
XRumer’s project window, showing the default Template project. Marked: the E-Mail section with Check this email, the topic and post text, and the Test button. We blurred the passwords.
🗂️ Step 7: Build a link base that works
XRumer ships with databases of more than 22 million sites, so you can post on day one. Its thematic posting system, Antispam, matches each message to the topic and language of the site it posts on. Forums get the deepest support (phpBB, Invision Power Board, vBulletin, XenForo, MyBB and more). Blogs, wikis, guestbooks, bulletin boards, link directories and contact forms come next.
Two rules on size and age:
- Keep a base between about 1.8 and 2.5 million lines. Above 2.5 million, XRumer tends to hang.
- Bases fade fast. Sites close, moderators delete links, and other XRumer users burn the same targets. Refresh your base about twice a month.
Raw base vs clean base. A raw base is a big list of targets nobody has tested. A clean base holds only the pages where XRumer actually placed a link. Clean bases give a far higher success rate. To build one:
- Collect a raw base. Use Hrefer (included with every tier) or another parser to search by footprint, such as comment-form phrases in many languages. You can also start from doğrulanmış bağlantı listeleri, or use XRumer to find new footprints for GSA SER. Never run more parser threads than you have proxies.
- Run it 2–3 times against a real test domain. Use a domain you own, not a made-up one, so nobody else can buy it and collect your links.
- Merge the successful results from all projects and servers. XRumer saves results in
C:\XRumer\Logs\<project>\<link base>\: one folder per project, with a subfolder for each base you ran. The links that worked are in Success.txt, and the semi-successful ones in Halfsuccess.txt. The other files hold profiles, activations and the rest. - Clean the list. Remove duplicates by host, strip comment and “unapproved” parameters from the URLs, and drop homepages and contact pages.
- Wait 1–2 weeks so moderators can approve or delete the links. Then use XRumer’s link base analyser to keep only the pages where your link is still live. What remains is your clean base.
The numbers shrink fast. Five million merged success lines can come down to about half a million unique, usable pages. That is normal.
The results of one project and one link base. Success.txt holds the links that worked; Halfsuccess.txt holds the semi-successful ones.
🤖 Step 8 (optional): Add an AI model and the MCP connector
XRumer 23 can use a large language model for four jobs:
- Writing post subjects and bodies that fit each forum’s topic
- Answering anti-bot questions such as “how much is two plus three”
- Filling form fields the program cannot identify on its own
- Translation, through the
#transmacro
You choose the provider in Options → LLM / GPT Options: OpenAI, Anthropic, Gemini, OpenRouter or any compatible service. You can also run a local model through Ollama, LM Studio, llama.cpp or vLLM and pay nothing per token. Botmaster’s guidance is that a 14B model is enough, on an NVIDIA GPU with 8 to 24 GB. A cloud provider is the simplest start: a small, cheap model such as gpt-4o-mini handles all four jobs.
In the same window, add your API key and choose the model. Tick Use GPT for unknown form fields processing and antibot-questions (jobs 2 and 3), set Auto-translate ile LLM (job 4), and press Kaydetmek.
Options → LLM / GPT Options. Marked: the provider, the model, the form-field and anti-bot setting, and LLM translation for the #trans macro. Your API key goes in the field between them.
MCP konektörü lets a script or an AI agent drive XRumer: start a run, watch it, change settings and pull a screenshot. Setup takes about five minutes:
- Tik Enable MCP-connector içinde Options → Advanced options.
- Copy your MCP key from your Botmaster account.
- Run
mcp_client.pyfrom XRumer’s MCP folder. It opens a control panel in your browser on 127.0.0.1, with nothing exposed to the internet. It needs plain Python 3.
Commands take 10 to 15 seconds, because XRumer checks in with the relay server about every ten seconds. Your XRumer password is never sent.
📈 Step 9: Point the links in the right place, then index them
Use XRumer as a power tier. XRumer links work best pointed at pages that already link to your site, not straight at your money page. A common structure:
- Tier 1: guest posts, PBN posts or strong articles that link to your page.
- Tier 2: forum threads and Web 2.0 pages that link to tier 1.
- Tier 3: XRumer, pointed at the tier 2 pages.
Get the tier 2 pages indexed before the XRumer run. Give it time: tiered campaigns often take two to three months to show their full effect in rankings.
Index the XRumer links. A link Google never indexes passes nothing, and forum profiles, guestbooks and comment links are exactly the kind Google often leaves out.
- Take the successful links itibaren Success.txt in the project’s
Logsfolder. - Send them to AVS Indexer: paste them in the dashboard, use the API, or ask Claude through the MCP server. Normal indexing costs 1 credit per URL. Before sending, every URL is checked. Dead pages (404, noindex, blocked by robots.txt) are skipped and the credit comes back.
- Spread big lists out. With drip-feed, a large XRumer run goes out in even daily shares over 2 to 30 days instead of all at once.
- About two weeks later, run the index checker to see which URLs Google actually indexed.
New accounts get 50 free credits to test it: index.asiavirtualsolutions.com
🔧 Keep it running: monitoring and troubleshooting
- Keep a run log. Write down the success rate of every run, per server. If it falls while the version, server and proxies stay the same, your base is fading or the server’s IP is worn out.
- Files disappear, or XRumer or XEvil will not start. An antivirus program has probably blocked or removed them. Check that Microsoft Defender Antivirus is removed (see Step 2), then unpack the program again from the original download into
C:\XRumerveyaC:\XEvil. - XRumer hangs or restarts. Lower the threads (100 XRumer / 100 XEvil), switch the modification back to Default, and check that the base is under 2.5 million lines.
- The network is maxed out but speed is low. Set the server’s DNS to a public resolver such as Google’s (8.8.8.8). Users report large speed gains from this alone.
- The success rate falls on one server only. Its IP or its proxies are probably worn out. Experienced users replace their servers every few months for fresh IPs.
- Garbled text or an encoding error in XEvil. XRumer and XEvil have English interfaces and normally run fine on English Windows, so you do not need to change anything up front. If you do see question marks or strange symbols instead of text, set Windows’ language for non-Unicode programs to Russian: Control Panel → Region → Administrative → Change system locale → Russian (Russia), then reboot. This changes only how older programs read text. Your Windows display language stays English.
- Several servers? A small script that watches XRumer’s CPU use and sends a Telegram alert when it stalls saves you checking each one by hand.
✅ Your XRumer setup checklist
- Standard or Business licence through a discount link, with version 23 StrongAI access and XEvil 7 beta access
- XRumer and XEvil together on a Windows VPS with 16 GB RAM or more, unpacked in C:\XRumer and C:\XEvil (not Program Files)
- Microsoft Defender Antivirus removed, Windows updates installed then paused, taskbar on the side
- XEvil on the XRumer 23.0.5+ preset, with rotating IPv6 proxies and a new proxy per request
- Posting proxies in XRumer (rotating SOCKS or our IPv4 proxies), with Anonymity on SOCKS or HTTP. Never post from the server’s own IP
- 100 XRumer threads, 100 XEvil threads (runs above about 200 tend to hang)
- Catch-all mailbox on your own domain, POP3 and IMAP showing OK
- Projects of up to 50 URLs with the page’s own keywords, tested before the run
- Bases under 2.5 million lines, cleaned and refreshed twice a month
- Successful links sent for indexing, index check two weeks later
❓ Sıkça sorulan sorular
Which XRumer licence should I buy?
Standard, for most people. It includes the XEvil captcha solver, so you do not pay per solve, and it allows two simultaneous installs. Lite has no XEvil. Business allows five installs, which makes sense once you run several servers side by side.
Is version 23 StrongAI included with the licence?
No. Version 23 StrongAI access is a separate purchase on top of a Standard or Business licence. Without it you get the older version 19 branch, which is slower and less stable. Check the Downloads section of your Botmaster account after you buy.
Do I need to turn off Windows Defender for XRumer?
Yes, on the server that runs it. Defender and other antivirus programs often block or delete XRumer and XEvil files, and exclusions do not always stop this. Remove Microsoft Defender Antivirus through Server Manager → Remove Roles and Features, then restart. The server then has no virus protection, so use it only for XRumer and keep sensitive files off it.
What is the best VPS for XRumer?
A Windows VPS with at least 16 GB of RAM that runs XRumer and XEvil together. Our XEvil VPS has 10 vCPU, 16 GB ECC RAM and Windows Server 2022, with XEvil installed and 1,000 rotating IPv6 proxy ports for reCaptcha. You install XRumer next to XEvil and bring your own licence.
Should XRumer and XEvil run on the same server?
Yes. They work best as one system. XRumer sends each captcha straight to XEvil on the same machine, with no network delay and no firewall rules to manage. One VPS with enough memory carries both comfortably at about 100 XRumer threads and 100 XEvil threads.
Kaç adet iş parçacığı kullanmalıyım?
Start at about 100 threads in XRumer and 100 in XEvil. That is a stable setup on version 23, and 100 XEvil threads match our 100-thread XEvil proxy package. The software can run 500 or more threads, but runs above about 200 tend to hang, and more threads usually means more hangs rather than more links.
Do I need proxies for XEvil?
Yes, for reCaptcha. Without proxies, every request comes from your server’s IP and sites start blocking it. Use rotating IPv6 proxies with a new proxy on every request. Our XEvil VPS includes 1,000 rotating IPv6 proxy ports. For reCaptcha v3, Botmaster recommends residential proxies.
Do I need proxies for XRumer itself?
Yes. XRumer must always post through proxies. Posting from your server’s own IP brings abuse complaints to your host, and the server can be shut down. Use rotating SOCKS proxies, or our IPv4 proxies, which also work with XRumer. Put them in xsocks.txt or xproxy.txt and set Anonymity to match. These are separate from the XEvil proxies.
How big should my link base be?
Between about 1.8 and 2.5 million lines. Above 2.5 million, XRumer tends to hang. Bases also fade within weeks, so refresh yours about twice a month and keep building a clean base from the links that actually worked.
Do I have to pay for an AI model?
No. XRumer 23 can use a local model through Ollama, LM Studio, llama.cpp or vLLM, with no cost per token. Botmaster says a 14B model on an NVIDIA GPU with 8 to 24 GB is enough. A cloud provider is easier to start with.
Why are my XRumer links not indexed?
Google skips many forum, guestbook and comment pages. Send your successful links to an indexing service such as AVS Indexer, spread large lists with drip-feed, and check the result about two weeks later with an index checker.
Is XRumer good for beginners?
It has a steeper learning curve than most link tools, and much of its community help is in Russian. If you have used GSA Search Engine Ranker, you will find your way around. Follow the settings in this guide, start with one server, and keep a run log. We answer XRumer questions in English.













